Our company focuses on the development and management of bearings. The needs of users in various industries can be connected more quickly and efficiently, which improves the response efficiency, makes the solution more targeted, and brings more benefits to customers!
Here are the main reasons for the noise
1. Impurities such as sand or carbon particles are mixed into the bearing to play the role of grinding
2. A large amount of water, acids or paint and other dirt are mixed into the bearing, which has a corrosive effect;
3. The bearing clearance is too small (improper compound peak is selected);
4. The type of lubricating oil or grease is not selected correctly;
5. Insufficient lubrication capacity (the oil level is too low, and the oil or grease leaks through sealing);
6. The bearing is clamped flat by the seat hole (the seat hole roundness is not good, or the seat hole is distorted and not straight);
7. The bottom of the bearing seat is uneven (causing deformation or even cracks in the bearing seat hole);
8. There are some sundries in the bearing seat hole (residual chips, dust particles, etc.);
9. The sealing ring is eccentric (touching one adjacent two parts and causing trade friction);
10. The bearing development is subject to some additional loads (the shaft is subject to axial tightening, or there are two fixed end bearings on one shaft).
