1. Turn off the pump and disconnect electrical power.
2. Locate the bearing housing on the pump. It may be located at the top or bottom of the pump.
3. Remove the grease fitting on the bearing housing with a grease gun.
4. Clean the grease fitting and bearing housing with a rag to remove any debris or old grease.
5. Insert the grease gun nozzle into the grease fitting and pump in the appropriate amount of grease recommended by the manufacturer.
6. Repeat the process on all bearings that need lubrication.
7. Replace the grease fitting and wipe away any excess grease.
8. Turn on the pump and check the bearings for smooth operation.
Always refer to the manufacturer's instructions and safety precautions when working with pumps and bearings.
