Are the inner rings of NAF cylindrical roller bearings interchangeable?
1. Many manufacturers of cylindrical roller bearings, such as the following, use a lot of sets to take out the inner and outer rings of their own bearings after the bearings are opened. If they are mixed, they may not be able to find their own bearing inner and outer rings. , I am afraid that it will affect the life of the bearing. In fact, the rings of this kind of bearings are all the same. Hongyuan Bearings is for the convenience of customers, so that customers can use the bearings with peace of mind. rest assured.
2. In addition, the suffixes of cylindrical roller bearings can be interchanged. For example, whether the inner rings of NU, NJ, and bearings can be interchanged. In this case, the suffixes of the outer ring models of the bearings shall prevail. The types of the two bearings are different, so they cannot be exchanged. If the inner rings of different models are found to be mixed, it will not affect the service quality and life of the bearings after assembly.
3. The outer ring of N series cylindrical roller bearings can be removed. Some bearing manufacturers can remove the outer ring of the bearing for use, but if it is used in this way, the FAG cylindrical roller The bearing itself has a bearing without an outer ring, and the cost price will be much lower, so customers should not take off the outer ring blindly to use it, which will waste the cost that an outer ring also adds to themselves.
